Version 1.2.1 - Apr 29, 2019
-
Fixed several display bugs.
Version 1.2.0 - Apr 9, 2019
Read more about this version
- Online Automatic Update Options.
- Sequential Printing.
- Added support for converting Camera time-lapse from MPEG to MP4 format.
- Added support for exporting Camera time-lapse to MP4 format files.
- Switch Height.
- Added the option of "Enable SSH service".
Version 1.1.0 - Oct 29, 2018
Read more about this version
- Added Developer function to enable access to control printers through the RaiseTouch WebAPI.
- Added fast pause function to Pro2 Series Printer.
- Added fast stop function to Pro2 Series Printer.
- Added Traditional Chinese in language Setting.
- Fixed the bug that a convex point occurs when a curved surface is printed at high speed continuously of Pro2 Series Printer.
- Fixed the IP conflict issue when setting static IP address, and increase the IP collision detection prompts.
- Fixed invalid Jerk setting issue of the Pro2 Series Printer.
- The heating time will not be counted as the rest of the printing time.
Version 1.0.0 - August 31, 2018
Read more about this version
- Added “Quick Settings” button to the Utilities Tab
- N series printer camera function
- Added shortcut to “Quick Settings” to Home page
- Added incognito mode
- Added EULA confirmation before update
- Added rsync for file synchronization on N series printer, accessible from SSH interface
- Automatic pre-extrusion progress is displayed when Pro2 unloads filament
- Added more slice parameters to model detail page
- Movement distance to shift axis control can be manually input for convenience and speed
- Added Polish in language Setting
- Optimized Pro2 Series Machine Log
- Added Reconnection Serial Port
Version 0.9.11 - June 14, 2018
- Fixed the issue that ideaMaker does not keep the same sort order of files as the sort order in printers
- Fixed the issue that the network is not connected automatically after reboot while using Ethernet
Version 0.9.10 - June 5, 2018
- Added Extruder Offset Settings for N series printers
- Added an option to choose Single or Dual version of motion board firmware update under Maintenance
- Added more information into serial log
- Adjusted preheating sequence to let the heated bed heating together with nozzles for Pro2 series printers
- Added an option to disable the password to get access the remote control the touchscreen from ideaMaker when Remote Access without Password under Setting -> More Settings -> Privacy and Security disable. If you disable this option, you need set a password for remote control
- Added an option to set the Z position of print bed dropping to after print stopped under Setting -> More Settings -> Advanced Settings
- Added an option to set whether WLAN Password is allow to be seen or not under Setting -> More Settings -> Privacy and Security
- Added Auto Negotiation, Port Speed, Duplex Mode as advanced settings for Ethernet tuning under Ethernet setting page. They will be available when Enable Advanced Settings enabled
- Added temperature check for CPU of screen logic board under Maintenance
- Fixed preheating issue after resuming a print. Or with Cool down after a print paused enabled, the print may directly start without preheating first
Version 0.9.9 - May 16, 2018
Read more about this version
- Added a firmware upgrade wizard in Maintenance under Other
- Added a Reconnect Serial Port button in Maintenance under Other -> Safe Mode
- Added Enable Extruder Offset and Extruder Offset settings under More Settings -> Hardware -> Extruders
- Added a Turn on filament sensor option under Advanced Settings
- Added a Cool down after a print paused setting under Advanced Settings
- Added sorting options for files and folders inside Local storage and USB storage
- Added auto-preloading filament before unloading (for Pro2 series printers)
- Added Camera function for Pro2 series
- Added Allow Remote Access without Password
- Added German Language
- Fixed Wi-Fi connection failure issue with non-Latin characters in Wi-Fi name
- Fixed long-time print resume loading issue after pausing by code M2000
- Fixed the height display issue during multi-object print
- Saved Loading/Unloading nozzle temperature after reboot
- Saved Move Step unit after reboot
Version 0.9.7 - January 16, 2018
Read more about this version
- Lower Printing Temperature Available
- User-defined Screen Lock Timeout
- Empty Password for Screen Lock
- SSH Password Security for Privacy and Security
- Backup Credential File
- Export Local Storage
- Check Storage Space before Operation
- User-defined Jerk
- User-defined Acceleration
- Save More Records for Serial Port Log
- Fixed the bug of temperature not updating in time
- Pause Reason Prompt
Version 0.9.2 - June 14, 2017
- Added option to clear print statistics
- Added option to reset privacy and security settings
- Added option to restore factory settings
- Added option to disable or enable collecting print statistics in dashboard
- Added option to set steps per unit and PID settings
- Fixed the issue that the height ratio of the printed models is incorrect when printing multiple models in sequential order
Version 0.9.0 - March 29, 2017
- Added support for Russian language
- Added support for Japanese language
- Added a feature to restore last saved screen brightness
- Added a feature to show the estimated completed time
- Added a feature to show the initialization stage of WiFi and Ethernet
- Added option to set the target pre-heat temperature while recovering the print job
- Added option to clear print information after the print job is completed
- Added option to enable screen lock
- Cooling down the extruders after finishing loading or unloading filaments
- Improved connecting via ethernet with a static IP address
- Corrected gcode name and file size in dashboard
Version 0.8.0 - November 21, 2016
- Added print time and material used in preview mode
- Added a function to sync real time when turning on the printer
- Added a function to record printing time and material used amount
- Improve the uploading speed of gcode
- Show target parameter and current parameter in Tune menu
- Fixed a bug of not enabling DHCP when connected with LAN
- Fixed the problem of wrong printing speed after resuming
Version 0.7.2 - August 19, 2016
- Added a cursor in input box
- Added a record of serial port log which can be loaded out to USB device or SD card
- Added a prompt of the error of motion board
- Added a Z drop when print finish in order to remove the model easily
- Fixed some problems of UI display
- Fixed a bug of keyboard letter
- Fixed a bug of recognizing notes when reading gcode
Version 0.7.0 - June 15, 2016
- Added a feature to pre-extrude manually while retracting filaments
- Added "FastStop" function to stop printing while pre-heating extruders and heat bed
- Added update notifier
- Added a feature to set SSH password
- Added French language support
- Added support for setting up custom WiFi
- Added a function of system monitoring to shut down touchscreen under crash situation
- Improved virtual keyboard for extended symbols
- Added a function to check uploaded file information and print uploaded file in upload queue
- Improved WiFi connection
Version 0.6.7 - April 27, 2016
- Added a feature to display current layer number and printed height in 'Home' page
- Added a feature to adjust the flow rate for left/right nozzle separately in 'Tune' page
- Added a feature to show motion controller board firmware version in 'Setting' page
- Added a feature to show the full name of the firmware when selected
- Fixed a bug of printing with wrong nozzle after pausing to swap filament
Version 0.6.5 - March 29, 2016
- Added printing task recovery list (support recovering interrupted printing task due to motion controller board error, file error and power loss)
- Added a function to create folders in local storage
- Added a function to copy, move, delete and rename multiple files and folders
- Added a safe mode for printer, supporting all operations except printing and controlling XYZ axis and extruders
- Added a battery volume display
- Added WiFi signal strength display
- Added a setting for time and time zone
- Added a function to set temperature in the "Home" page
- Added a function to restore default flow rate after finishing print
- Improved system stability
- Added a function to refresh the model list after finishing uploading
- Fixed a bug to delete .data file with .gcode file together
- Fixed a bug when resuming from pause
Version 0.6.1 - January 31, 2016
- Add electrical board error information reminder
- Fix a loading bug when resuming or re-print a job
- When changing settings under 'Tune' menu, there is no need to delete the existing number before inputting new number and the existing number is highlighted
- Add a print cache file to help resuming or re-print a job
Version 0.5.8 - January 13, 2016
- Force cooling all of nozzles while printing is stopped or finished
- Improve moving step of nozzle while calibrating bed level
- Improve touch experience
- Add popup message with sensor issues
- Fix issues on UI interface
Version 0.5.7 - January 8, 2016
- Improve error handling for file cache
- Hide empty USB drive
- Fix encoding issue while transferring list of file names
- Fix issue that files view is invalid while USB or SD card has been plugged out
Version 0.5.6 - January 6, 2016
- Added file cache while print files from SD card or USB
- Added file remove functionality
- Added battery voltage view in Setting-Other tab
- Added tip for saving dump file on the screen while power loss is occurred
- Fix encoding issue while parsing print template
- Fix issue that file info is incomplete in the uploading queue
- Improved UI layout
